High Sensitivity OGI Infrared Camera for Petrochemical Industry

320x256 / 30μm Cooled Gas Leakage Detector Camera with 23mm Lens for Petrochemical Industry

GAS330 is a cooled infrared camera module for gas leakage detection. It integrates 320x256 / 30µm MCT cooled MWIR infrared detector to visualize the invisible Volatile Organic Compounds (VOCs) that cannot be seen by naked eyes.

Gas leakage, especially the harmful Volatile Organic Compounds, is always a serious problem that can not be ignored in safety production. Once these harmful gases escape, or worse, cause an explosion, people and property will suffer huge losses. Therefore, great attention should be paid to the detection of gas leakage.

- Resolution: 320x256

- Pixel Pitch: 30µm

- NETD≤15mK, High Sensitivity

- Spectral Response: 3.2µm±0.1µm~3.5µm±0.1µm

- Wavelength Customizable Based on Different Requirements

- Integrate with DVP/CameraLink Interface Easily

The GAS330 gas leak detection thermal imaging camera is used for visiualizing the invisible VOCs (volatile organic compounds) and detecting gas leakage such as: Methane, Ethane, Propane, Butane, Pentane, Hexane, Heptane, Octane, Ethylene, Propylene, Isoprene, Methanol, Ethanol, Butanone, Benzene, Toluene, Xylene, Ethylbenzene etc.

1. What is a cryocooler used for?

Cryocoolers are machines that keep sensors extremely cold so that thermal images can be taken on long-term missions. In many high-end applications, the sensors that capture images require extremely low temperatures.

2. What are the main factors to measure the quality of Cryocooler?

Long battery life and reliable operation are main factors to measure the quality of a cryocooler. GSTiR cryocooler has a wide operating temperature range and excellent reliability. Its MTTF (Mean Time to Failures) has reached to 10,000 hours, which meets 24*7 boot operation requirements.

3. What is MTTF?

MTTF (Mean Time to Failure) measures a part’s reliability. It shows you how long on average a part lasts before it breaks and you have to replace it. On a basic level, it tells you about the quality of the parts you’re buying. The longer they last, the more value you’re getting from them.