Petrochemical Industry Infrared Gas Leak Detection Camera With 23mm Lens

320x256 / 30μm Cooled Gas Leakage Detector Camera with 23mm Lens for Petrochemical Industry

GAS330 gas leak detection camera integrates 320x256 / 30µm MCT cooled MWIR infrared detector and covers mid wavelength from 3.2 to 3.5μm.

It is a cooled infrared camera module that can detect the leaks of dozens of volatile organic compounds (VOCs). VOCs are human-made chemicals that are used and produced in the manufacture of paints, pharmaceuticals, and refrigerants, some of which may have short- and long-term adverse health effects.

By using this thermal module, inspectors can quickly detect harmful gas leakage, which plays a very important role in safe production, efficiency improvement and cost saving.

- Resolution: 320x256

- Pixel Pitch: 30µm

- NETD≤15mK, High Sensitivity

- Spectral Response: 3.2µm±0.1µm~3.5µm±0.1µm

- Wavelength Customizable Based on Different Requirements

- Integrate with DVP/CameraLink Interface Easily

The GAS330 gas leak detection thermal imaging camera is used for visiualizing the invisible VOCs (volatile organic compounds) and detecting gas leakage such as: Methane, Ethane, Propane, Butane, Pentane, Hexane, Heptane, Octane, Ethylene, Propylene, Isoprene, Methanol, Ethanol, Butanone, Benzene, Toluene, Xylene, Ethylbenzene etc.

1. What is a cryocooler used for?

Cryocoolers are machines that keep sensors extremely cold so that thermal images can be taken on long-term missions. In many high-end applications, the sensors that capture images require extremely low temperatures.

2. What are the main factors to measure the quality of Cryocooler?

Long battery life and reliable operation are main factors to measure the quality of a cryocooler. GSTiR cryocooler has a wide operating temperature range and excellent reliability. Its MTTF (Mean Time to Failures) has reached to 10,000 hours, which meets 24*7 boot operation requirements.

3. What is MTTF?

MTTF (Mean Time to Failure) measures a part’s reliability. It shows you how long on average a part lasts before it breaks and you have to replace it. On a basic level, it tells you about the quality of the parts you’re buying. The longer they last, the more value you’re getting from them.